The velocities are used to produce current, depth and wave parameters.
Here is the list of field names:
| Field name | Description | Units |
|---|---|---|
| Year | The year the data were collected | n/a |
| Yday | Decimal year day (start time of sampling) | UTC, January 1 at 00:00 is 1.0 |
| MO | The month the data was collected | UTC |
| DA | The day the data were collected | UTC |
| HH | The hour the data were collected | UTC |
| MM | The minute the data were collected | UTC |
| SS | The second the data were collected | UTC |
| lrec_adcp | Total number of records collected during averaging period | n/a |
| yday_adcp | Year day from ADCP (drifts) | 0.5 = Jan 1 GMT |
| press_adcp_mean | mean pressure above 2.1 mab | cm |
| temp_adcp_mean | mean water temperature at 2.1 mab | Deg C |
| press_adcp_m50 | median pressure above 2.1 mab | cm |
| temp_adcp_m50 | median water temperature at 2.1 mab | Deg C |
| press_adcp_std | std dev of detrended pressure | cm |
| temp_adcp_std | std dev of detrended water temperature | Deg C |
| press_adcp_length | number of records passing filter (9m < p < 12m) with outliers removed | n/a |
| temp_adcp_length | number of records passing filter (-25 < t < 35) with outliers removed | n/a |
| nshort_adcp | from unpacker - nbadChksum | n/a |
| nmissing_adcp | from unpacker - nbadSizeRecs | n/a |
| pbad1 | beam1: percent bad in removing outliers (3.5*std from mean) | n/a |
| pbad2 | beam2: percent bad in removing outliers (") | n/a |
| pbad3 | beam3: percent bad in removing outliers (") | n/a |
| pbad4 | beam4: percent bad in removing outliers (") | n/a |
| wave_height_pressure | 4*sqrt(sum(Snn).*dF) (f > 0.05) Snn from pressure | cm |
| wave_period_pressure | sum(Snn)./sum(Snn.*f) | seconds |
| wave_height_all | 4*sqrt(sum(Snn).*dF) (f > 0.05) Snn from surface velocity | cm |
| wave_height_swell | 4*sqrt(sum(Snn).*dF) (0.05 < f < 0.15 Hz, 20 -> 6.7 Seconds) Snn from surface |
cm |
| wave_height_windwave | 4*sqrt(sum(Snn).*dF) (f > 0.15, > 6.7 seconds) Snn from surface | cm |
| wave_period_all | sum(Snn)./sum(Snn.*f) from surface velocity (f > 0.05) | seconds |
| wave_period_swell | sum(Snn)./sum(Snn.*f) from surface velocity (0.05 < f < 0.15Hz)) | seconds |
| wave_period_windwave | sum(Snn)./sum(Snn.*f) from surface velocity (0.15 < f < 0.25) | seconds |
| wave_direction_all | wve direction from bottom PUV (f > 0.05) | degrees from Ntrue |
| wave_direction_swell | wave direction from bottom PUV (0.05 < f < 0.15Hz)) | degrees from Ntrue |
| wave_direction_windwave | wave direction from bottom PUV (0.15 < f < 0.25) | degrees from Ntrue |
| Urms_bottom | bottom orbital velocity | cm/s |
| pitch | pitch | degrees |
| roll | roll | degrees |
| heading | heading* | degrees |
| z0 | height above bottom at first bin | cm |
| dz | distance between bins | cm |
| vel_1_East_mean | Eastward component of velocity at bin 1 | cm/s |
| vel_1_North_mean | Northward component of velocity at bin 1 | cm/s |
| sigstren_1_mean | mean signal strength at bin 1 | dB |
| sigstren_1_std | std dev of detrended signal strength at bin 1 | dB |
| sigcor_1_mean | mean correlation coef (cc*100/255) | n/a |
| vel_2_East_mean | ||
| vel_2_North_mean | ||
| sigstren_2_mean | ||
| sigstren_2_std | ||
| sigcor_2_mean | ||
| Parameters vel_N_East, vel_N_North, sigstren_N, and sigcor_N repeat through N=25. | ||
| Snn_1 | estimate of surface spectra (Snn) for each freq bin** | cm^2/s^2 |
| Snn_2 | Snn estimated from bin 2 | |
| Continuing through each frequency bin to Snn_30 | ||
| Directn_1 | Estimate of direction for each frequency bin | degrees from Ntrue |
| Continuing through each frequency bin, N=30 | ||
SN 1654
Cleaned ADCP faces 10/29/04
Cleaned ADCP faces 12/16/04
Cleaned ADCP faces 5/12/05
Turn-around 8/05
Cleaned ADCP faces 11/12/05
Cleaned ADCP faces 3/7/06
Cleaned ADCP faces 4/19/06
Turn-around 8/06
Turn-around 9/07
Cleaned transducer faces in Jan 29,2008
Found ADCP faces heavily fouled and cleaned again: 25 April, 2008
Node recovered: May 2, 2008 - cleaned up and redeployed May 24
ADCP faces cleaned: October 15, 2008
ADCP CorMag algorithm changed Nov, 2008
ADCP faces cleaned: March 21, 2009
ADCP faces cleaned: May 12, 2009
ADCP faces cleaned: July 14, 2009
ADCP faces cleaned: October 15, 2009
Node turn-around 10/11/2010 - old ADCP (SN 1654) but newly refurbished
new firmware; new transducers; new Serial Number: 14391
Node Turn-around 6/6/2011 - SN 10295
ADCP failed (bad cable) 10/13/2011
New ADCP installed 10/24/11 (SN 1654/14391)
SO: We recovered and replaced SN 10295 with ADCP SN 14391 (Sep 14, 2012) but the cable didn't work. So on October 8, we replaced cable and started collecting data.
NOTE: for SN 14391 11/7/2012 changed WE from 2000 to 5000 (Vertical velocity error for single ping data). on 11/8/2012 changed WA from 50 to 255 (higher false target). This now matches SN 10295 and produces fewer flagged bad records. (See Pbad1-4 in ADCP_s data.)
Last updated: December 2012